Tag Archives: Nexus

A Great Day Flying

Today was a very good day, though the weather was somewhat cold, it was probably the most fun I’ve had at the airfield in a while (probably since the summer vanished). First of all, the Road on the way was… well… Interesting…

dscf1378

getting up the slope wasn’t hard, we were in Chris’s 4×4, it didn’t even think about it… Then the airfield was somewhat snowy too, having got all my stuff out of the car, it was just a sea of white with some stuff in the middle…

DSCF1379

Still, we got the BBQ running, and off for a flight, my first flight was OK, but my landing wasn’t. after getting one skid on the bit we had compacted, and the other skid on the bit we hadn’t, it decided to sink into the ground at an interesting angle. I didn’t take off from here…

DSCF1389

My second to last flight of the day, was the first time I had flown with other aircraft in the air (I don’t yet have my A-Cert), The other helicopter was close at times, but he had to be, as this is why…

That’s right, the other helicopter was filming me hovering, despite hovering being frowned upon on the main strip, there was only us two flying, so that’s ok, and I wasn’t going to start throwing it around the air and expecting Scott to keep up with the camera (and I don’t have the confidence to, of course).

and my final flight of the day before my fingers fell off due to the cold, was short, mostly because I couldn’t quite see how much fuel I had left, I didn’t know how much battery I had left, and on top of all that, I was getting somewhat cold. However, it was also filmed (Thanks again Scott).

On the plus side, I was dressed for the weather, which is more than I could say about some people in this weather.

It's a bit cold...

After that, I decided to pack up, but before I headed of, I did have to film Chris try and do some touch-and-go’s with his FunJet. of which, it didn’t quite end how he wish, but it did give us alot of enjoyment. Here’s the footage of thos, I hope it makes you laugh as much as it did us.

First, some successful touch & go’s;

(I know it says Part 3, but actually it was first)

Then, what happened next….

and the results of it…

It has to be said, I do enjoy weekends like this, I hope yours was just as entertaining.

Problem after problem…

So far, I have not crashed my Nitro Helicopter, The Nexus, due to anything I have done. Which is good. However, there has been problem after problem with it, I’ve had the switch malfunction for the radio electrics, I’ve had the tail rotor pitch rod snap, I’ve had the servo on my elevator malfunction, I’ve had an engine problem that resulted in getting through 4 glow plugs in 2 weeks, and today I had the data cable to my Pitch servo break in flight.

Fortunately, today’s incident I had done 2 figure 8′s, an I had just come in to a hover over the ‘heli-pad’ (this is a clear ‘H’ in all the snow that I had created with the shovel) I was about to land when the wire broke, and fortunately, because the servo still had power, it went into fail-safe (moves the servo into 0 position) and it thumped to the ground. I was only a foot off the ground at the time so no further damage was caused.

Here’s a picture of the broken wire
servo wire

I guess it’s good that all the “crashes” have been due to faults, but it does take a kick out of your confidence when things like this happen. Still. It’s all fixed (replaced the servo) and ready to go again, but as there’s just over an hour of daylight remaining, I’ll just leave it until tomorrow. Hopefully these problems will become less and less, I’ve had some nice flights with this one recently, and hope I get many more in before it’s killed off.

The First flight

well, almost a month after getting the Nexus 30 Heli, I have finally had a flight. Well, a Hover, but it’s close. Unfortunatlye because of the age of this particular heli, finding parts has been somewhat of a challenge, it’s now unbeleivably close. and here’s me setting it up ready to fly.

DSC00248

So far, it has had a new rotor head, various replacement screws, a new battery, new Gyro, a complete engine rebuild, new rotor blades and a cable tidy up. after all this, it is now much better than it was, however there is still a slightly uncomfortable wobble, coming from the main rotor grips, it seems these have not been machined properly and there is around 2mm of play in them, this by the time it gets to the end of the rotors is quite alot of play (these should not move atall). so I’m now hunting around for Kyosho blade grips – this is a hard task.

Anyway, aside from the blade grips, it is able to fly, though it’s probably not a great idea to do it for very long, as it will damage the rotor head with the wobble, but here it is.

DSC00253

I’m hoping over the next few weeks I will be able to source the blade grips, and get rid of the wobble so that I can actually start to fly it properly (that is, hover for 6 months, then nose-in hover for another 6…)

Yes it’s a toy, but it’s also an expensive one, it would be nice if this was done right.

Toys and Hobbys

Overtime, People go through lots of hobbys, and I’m no different. However, I rarely find a cheap hobby to do. I have done juggling and now everytime I’m in Camden I spend £100+ on things for that, though you don’t need to service them, that’s ok. I’ve taken to playing computer games, Guitar hero (mostly the drums) on the Wii and racing games and flight sims on the PC. The equipment to play games properly is also not cheap, you need a nice fast computer, plus the racing games I have a £180 steering wheel set. The Wii is pricey, the drums for the Guitar hero (with Guitar hero) was around £130 and before you know it you’ve spent a few thousand pounds on…. stuff.

Well, some years ago, I took to flying Model Helicopters, started with small ones, and sort-of worked up, I flew someone else’s helicopter, but not for very long, this one was a couple of feet long. I haven’t flown one for a while now, and I was talking about buying one again so I could go flying with it again. However the need to buy one has been shunted out. and here’s why…

DSCF1304 Yep, That’s right, I now have a Nexus 30 Helicopter, this has a petrol engine, and no, I won’t be flying this in the house. It did however need some work, This was my fathers, and he…. well…. crashed it. :-) This week has been delivery after delivery of very small parts and the rotor head has been re-built, it has new rotors, and is about ready to crash fly.

Basingstoke Model Flying Club have a field, that I will be at on Sunday, at least trying to fly this. though, it does still need some setting up, testing of the servos, the engine, and a few other checks too, it looks like I will have help in getting it through the checks, and air-born, hopefully some help trying to fly the thing too (I need a trainer).

I’m not scared of flying this. I am, however, scared of landing it, that’s the bit where it all goes wrong. This is going to A) be an expensive hobby, and B) going to take a very long time. I’m pretty sure I’m not going to get bored of this one very quickly, and even if I do, I’ll probably have a helicopter to build again.

Well, wish me luck on sunday for getting this thing off the ground, and safely back again.